Orignal Self Excited 5Amp Automatic Voltage Regulator ADVR-054
SKU:ST-82790322
Couldn't load pickup availability

- Overview
- Shipping & Delivery
- Warranty
Product Name: Orignal Self Excited 5Amp Automatic Voltage Regulator ADVR-054
Part Numbers: ADVR-054, ADVR054
Description:
ADVR-054 has large heat sink which significantly increases cooling efficiency. This AVR has over excitation protection and it can automatically shut-off output when voltage sensing is lost. Compatible replacement for Basler KR7, Airman DST-100-2, Markon 36245, Markon MD1C, Sincro BL4,Datakom AVR-4.
Product Specifications:
Sensing Input(average Reading):
Voltage 170 to 260 Vac @ 220 Vac 1 phase 2 wire
Voltage 340 to 520 Vac @ 440 Vac 1 phase 2 wire 220/440 Vac (DIP switch setting)
Frequency 50/60 Hz (DIP switch setting)
Power Input:
Voltage 100 to 300 Vac 1 phase 2 wire
Frequency 40 to 60 Hz
Excitation Output:
220 Vac 1 phase continuous 63 Vdc 5A Max. 90 Vdc 7A for 10 seconds
Resistance Min. 15 ohms
Max. 100 ohms
External Voltage Adjustment:
Max +/-3.5% @ 1K ohm 1 watt potentiometer
Voltage Regulation:
Less than +/-0.5% (with 4% engine governing)
Build Up Voltage:
5Vac 25Hz residual volts at power input terminal
Soft Start Ramp Time:
3 seconds +/-10%
Emi Suppression:
Internal electromagnetic interference filtering
Static Power Dissipation:
Max. 8 watts
Under Frequency Protection (Factory Presets):
50 Hz system presets knee point at 45 Hz
60 Hz system presets knee point at 55 Hz
Over Excitation Protection:
78 Vdc +/-6% @ 220 Vac Time delay 5 seconds
Function can be turn off
Voltage Thermal Drift:
Less than 3% at temperature range -40 to +70 °C
Under-Frequency Knee Point Thermal Drift:
Less than +/-0.1 Hz at -40 to +70 °C
Environment:
Operating Temperature:
-40 to +60 °C
Storage Temperature:
-40 to +85 °C
Relative Humidity:
Max. 95%
Vibration:
5.0 Gs @ 60 Hz
Physical Specifications:
Measurements:
121.0 (L) x 81.0 (W) x 44.5 (H) mm
4.76 (L) x 3.19 (W) x 1.75 (H) inch
Weight:
270 g +/-2%
0.6 lb +/-2%
Processing Time
Orders usually ship within 3 business days after we receive cleared payment.
Processing times may vary depending on product availability, order verification, warehouse handling, public holidays, or other operational factors. If additional processing time is required, we will contact you where necessary.
Shipping Methods and Estimated Delivery
We use different shipping methods depending on the destination country, product type, product weight, shipping address, and available carrier services.
Express Shipping: FedEx, DHL, UPS, USPS. Estimated delivery time is usually 5-7 business days after shipment.
Standard Shipping: YunExpress, Aramex, postal services, or similar services. Estimated delivery time is usually 7-12 business days after shipment.
Delivery times are estimates only and are not guaranteed. Actual delivery times may vary depending on the carrier, destination country, local customs procedures, weather, public holidays, and other circumstances outside our control.
Warranty Period
The warranty period starts from the original purchase date.
The warranty does not restart or extend after a repair, replacement, or exchange, unless required by applicable law or confirmed by Stellar Spares in writing.
Who Is Covered
This warranty applies only to the original purchaser and is not transferable.
Proof of purchase may be required for any warranty claim.
What Is Covered
This warranty covers defects in workmanship or components under normal use during the warranty period.
If a product is confirmed to be covered by warranty, Stellar Spares may repair the product, replace the product, provide a suitable replacement part, or offer another reasonable solution.
What Is Not Covered
This warranty does not cover normal wear and tear, routine maintenance, consumable wear, cosmetic damage, misuse, abuse, accident, neglect, contamination, overheating, electrical damage, improper storage, or damage caused by other parts or systems.
This warranty does not cover incorrect part selection, incompatible application, failure to confirm fitment before purchase, or installation on equipment for which the part is not suitable.
This warranty does not cover improper installation, unauthorized repair, modification, tampering, disassembly, or failure to follow installation or maintenance instructions.
This warranty does not cover labor costs to install, remove, inspect, diagnose, test, or reinstall any product.
This warranty does not cover rental replacements, substitute parts bought from other suppliers, machine downtime, vehicle downtime, loss of use, production loss, lost profits, towing costs, travel costs, diagnostic costs, damage to equipment, damage to vehicles, collateral damage, or other indirect or consequential losses, except where liability cannot be excluded under applicable law.
Consumable or wear items, such as filters, belts, seals, gaskets, hoses, and similar maintenance parts, may have limited or no warranty coverage unless otherwise stated.